The work of the through type cleaning machine is mainly used for cleaning parts in daily life. In the maintenance industry of chemical, light industry, transportation, and other design industries, the use of the through type cleaning machine is very common. The following content mainly explains the principle of the cleaning equipment here, as well as the main composition structure and application conditions, hoping to be helpful to everyone.

一、工作的原理介紹，當被清洗的工件表面出現大量的污垢和油污等其他類的雜質時，通過式清洗機利用噴射水的方式，借助機械力的主要作用，和金屬的洗滌劑以及熱能等配合之下，對污垢逐漸的進行濕潤、軟化和分離工作，然后還要使用專用的清洗液將污垢徹底清除，并確保清洗的目的即可。

1、 Introduction to the working principle: When a large amount of dirt, oil, and other types of impurities appear on the surface of the cleaned workpiece, the through type cleaning machine uses spray water to gradually wet, soften, and separate the dirt, with the main function of mechanical force, metal detergents, and heat energy. Then, a dedicated cleaning solution is used to thoroughly remove the dirt and ensure the purpose of cleaning.

二、通過式清洗機在整體的系統分類上主要包含的有過濾的系統、吹干的系統、溫控的系統、電氣的控制系統、輸送系統和加熱的系統等組合而成的，基體的主要組成由水箱、罩殼和機架，因此通過式清洗機在整體結構設計上比較緊湊，外觀整潔大方，功能更是全面。

2、 The overall system classification of the through type cleaning machine mainly includes a combination of filtration system, drying system, temperature control system, electrical control system, conveying system, and heating system. The main components of the substrate are water tank, cover, and frame. Therefore, the overall structural design of the through type cleaning machine is relatively compact, with a clean and elegant appearance and more comprehensive functions.

三、基體的材質主要選用的是型鋼進行焊接組成的，在罩殼的設計上采用的是可拆卸的方式，主要選用鋼板制造而成的，配置在機架表面框架的結構上，維修時更加的便捷，拆卸起來也非常的便利，通過式清洗機水箱內外的兩層基體都是選用的鋼板，然后將其焊接制造的。

3、 The material of the substrate is mainly composed of welded section steel, and the design of the cover is detachable. It is mainly made of steel plates and configured on the surface frame of the frame, making maintenance more convenient and disassembly very convenient. The two layers of substrate inside and outside the water tank of the through type cleaning machine are both made of steel plates, which are then welded and manufactured.

四、溫控和加熱的系統對于通過式清洗機的主要作用是，當設備處于運行的狀態下，清洗液可以有效的進行加熱處理，正常情況下，加熱的系統主要利用水和電加熱的方式，清洗液的有效加熱，而清洗液在溫度上的表示通過室溫能夠直接將其調整到合適的溫度要求，有效的滿足不同情況下的使用要求。

4、 The main function of temperature control and heating systems for through type cleaning machines is that when the equipment is in operation, the cleaning solution can be effectively heated. Under normal circumstances, the heating system mainly uses water and electric heating to effectively heat the cleaning solution. The temperature of the cleaning solution can be directly adjusted to the appropriate temperature requirements through room temperature, effectively meeting the usage requirements in different situations.